AXIS H-EMC/ AXIS H-EMC + W
Implement ECU software update as of
SW 2.08.00
Rauch Landmaschinenfabrik GmbH
+49 (0)7221/985-250 service@rauch.de
Page
9
of
16
Update SW
2.08.00
27/08/14
Chapter 410
After selecting the file path, press OK.
5.3 Selection and transmission of the languages and the softkset.xml file
• Select the desired language in the right-hand program field. The file ending
corresponds to the country code (example: AXIS.en)
• The softkset.xml file must be transmitted at all times!
• As of software 3.00.00, a key assignment for the WTK joystick (Rauch no. 2057592)
is also provided in the file aux2File.dat. This file contains a preconfigured key
assignment for the joystick.
The softkset.xml
file must be
transmitted
Language
selection
Press the key to
start the file
transmission to the
implement ECU
To Next Page
Loading...
