AXIS H-EMC/ AXIS H-EMC + W
Implement ECU software update as of
SW 2.08.00
Rauch Landmaschinenfabrik GmbH
+49 (0)7221/985-250 service@rauch.de
Page
10
of
16
Update SW
2.08.00
27/08/14
Chapter 410
5.4 After the transmission
• After the transmission of the language files and the <Softkset.xml>, the files are
displayed on the left-hand side of the LH-Loader program.
• Check to ensure that all desired files have been transmitted:
• Close the Teejet File Loader.
• Switch off the terminal.
• Disconnect the download cable and reattach the blind cap on the
PG plug.
• Re-start the terminal and wait until the spreader has been registered
in the terminal.
• Deleting the object pool of the terminal:
Spreader menu:
Menu => System/test => Service => code 3354
Select page 2
To Next Page
Loading...
