To Next PageTo Next Page
Need help?Do you have a question about the rav RAV6351 LP and is the answer not in the manual?
Provides a key to understanding safety and operational symbols used throughout the manual.
Details the safety mechanisms integrated into the lift for user protection.
Identifies and explains residual risks and their warning indicators.
Specifies necessary conditions for the installation site, including lighting and space.
Outlines steps for preparing the floor and ensuring adequate structural support.
Guides on correctly positioning platforms and connecting hydraulic components.
Instructions for electrical connections, including safety devices and circuit breakers.
Details on connecting the pneumatic system, including air supply requirements.
Instructions for connecting limit switches, solenoid valves, and pressure switches.
Procedure for bleeding air from the hydraulic system to ensure proper function.
Steps to synchronize lift platforms for correct operation.
Instructions for checking and maintaining the hydraulic oil level.
How to activate and verify the function of safety devices like pressure switches.
Procedures for anchoring the lift to the ground and aligning platforms.
Steps to ensure platforms are level when fully down.
Detailed checks for siren, microswitches, and pressure switches.
Lists prohibited actions and unsafe practices to avoid during operation.
Guidelines for using manufacturer-approved accessories safely and correctly.
Emphasizes the requirement for trained and authorized personnel to operate the lift.
Outlines essential pre-operation safety checks and daily procedures.
Step-by-step instructions for performing an emergency drop of the lift.
Refers to section 4.13 for checking safety devices and warns against tampering.
Procedure for changing hydraulic oil in the control unit according to service intervals.
Specifies lubrication points and frequency for smooth operation and longevity.
Instructions on how to clean solenoid valves to maintain their functionality.
Troubleshooting steps for complete lift failure, checking power and fuses.
Guides on resolving issues where the lift fails to lower, checking obstacles and valves.
Addresses causes of slow descent, such as valve issues or pump problems.
Troubleshooting steps when the motor runs but the lift does not elevate.
Solutions for when lift platforms do not move in sync.
Details required information for ordering replacement parts accurately.
Provides an overview of machine components and relevant diagrams for part identification.
Schematics showing the electrical layout and component connections.
Diagrams illustrating the pneumatic system and its components.
Schematics detailing the hydraulic system and its parts.
Detailed visual breakdowns of major assemblies like main lift, cylinders, and controls.
A checklist of crucial checks to perform immediately after installation.
A checklist for regular maintenance and safety inspections.
Section for documenting unscheduled or random inspection activities.
Details about the machine's identification plate and the importance of its visibility and integrity.
General| Brand | rav |
|---|---|
| Model | RAV6351 LP |
| Category | Lifting Systems |
| Language | English |
