Electric elements chart
Specification
Instructions for use
1. Remove product from packaging
2. Always use a clean, fresh water. Before every use, change the water.
3. Make sure the device is water (water level indicator on the front of the device)
4. Start klimator - The device will work in middle gear (2), after 3 seconds, you can increase (3) or decrease (1)
speed of work.
5. Cool - when you add fresh cold water or ice, press this button. The temperature drops after 20 seconds
6. Swing - press this button to run the oscillation ventilation.
7. Always switch the device from the outlet before cleaning.
8. Remove cartridges Cooling
9. To clean use a soft, damp cloth and a mild detergent solution.
10. Do not use harsh detergents to clean.
11. It is recommended to clean the pump and water tank at least once a month. Regular cleaning ensures long
and reliable operation of the device
Parts description
1 Control Panel
2 handle
3a of the tank top cover on the ice
3b side cover of the water tank / ice
4 Water level
5 Wheels
6 Moving the pen supply
7 Air Filter
8 drip
9 Rear Panel
10 mains cable with plug
To Next Page
Loading...
