32
14. Apply the Region Settings to all the desired baselines.
NOTE: The region settings will default to the most recent Region Setting
Configuration. As a rule, apply all the same types of offsets in order to
minimize reconfiguration.
15. When starting a job, select the desired operation plan.
16. During a job, select the Operation Planning widget to access the settings. Any
settings updated within the job will be saved and applied to the plan.
RUN SCREEN OVERVIEW
The image below is an example of a run screen. This section provides basic
information on run screen layout and widgets.
FIGURE 16. CRX Run Screen
RUN SCREEN OVERVIEW
SIDE BAR ICONS
There are many side bar icons available on the run screen. The table below shows the
widget image as well as a brief description of function. Run screen configuration will
vary by device and settings.
Side Bar
Icons
Side Bar
Icons
To Next Page
Loading...
Need help?
General
