EasyManua.ls Logo

Raven GEN 4000 - DC Usage and Appliance Loading Guide

Raven GEN 4000
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
In general, capacitive and inductive loads, especially motor-driven
devices, have a large starting current. Use the following table as a
reference guide when connecting electric appliances to the generator.
DC Usage
This Generator is equipped with a cigarette lighter style12VDC
receptacle. The maximum draw for this DC outlet is8.3 Amps.
The 12VDC receptacle is not intended for use tocharge automotive
batteries. The cigarette lighter style receptacle permits the use of
any electrical device designed for use in a 12VDC cigarette style
outlet similar to ones found in automobiles. The electrical device
has a power cord with a metal pin on the bottom a
nd two leaf
springs on the sides. Some common automotive type electrical
devices are inflators, vacuum cleaners, chargers of various types
and more.
To Use: Simply plug the electrical device power cord into the
12VDC outlet and ensure the power cord is securely in place.
Use the device as instructed. Remove after use by simply pulling
the power cord out of the receptacle.
DC RECEPTACLE
Tool or Appliance Estimated Running Watts
Estimated Additional
Starting Watts
Incandescent Lights (4
Quantity × 75 Watts)
300 0
TV (Tube Type) 300 0
Refrigerator or Freezer 700 2200
Furnace (1/2 Horsepower) 800 2350
Well Pump (1/3 hp) 400 600
Radio 200 0

Table of Contents

Related product manuals