CHAPTER
2
P/N 016-5030-063 Rev. B 3
C hapter 2
Introduction
Congratulations on your purchase of the SmarTrax™ MD system!
SmarTrax MD-assisted steering takes the stress out of driving and makes it quick and easy for you to improve
your operating efficiency and performance. SmarTrax MD is compatible with Cruizer II™ and Cruizer II™ RTK,
Envizio Pro™, Envizio Pro®, Envizio Pro XL™, and Viper Pro™ systems.
The following instructions are designed to assist with the proper installation of the SmarTrax MD system. Refer
to the SmarTrax MD Calibration & Operation Manual (P/N 016-5030-020) for assistance with calibrating the
software and using the SmarTrax MD system.
This manual applies to the following machines:
MAKE: John Deere
MODEL: 8X60Series - 8560, 8760, and 8960
8X70 Series - 8570, 8770, 8870, and 8970
FIGURE 1. John Deere 8970
To Next Page
Loading...