To Next PageTo Next Page
Need help?Do you have a question about the Ravenheat CS 80 T and is the answer not in the manual?
General| Type | Combi |
|---|---|
| Weight | 38 kg |
| Mounting | Wall-mounted |
| Fuel Type | Natural Gas |
| Fuel | Natural Gas / LPG |
| Boiler Type | Combination Boiler |
Overview of boiler functions, user control, and efficiency.
Minimum distances required for safe installation and servicing.
Details checks for system pressure and readiness before boiler operation.
Explains the meaning of various indicators on the boiler's digital display.
Illustrates the boiler's digital display, its elements, and indicators.
How to view operational parameters like pressure, fan speed, and temperature.
Guide on setting daily heating on/off times via the digital clock.
Information on interpreting error codes for troubleshooting common boiler faults.
Details the safety features integrated into the boiler's operation.
Covers gas safety, installation compliance, and relevant standards.
Details required clearances for side, top, bottom, and front of the boiler.
Covers gas meter checks, pipe sizing, and testing for gas tightness.
Guidelines for locating and installing the boiler's flue system.
Detailed diagrams and requirements for flue terminal placement.
Details on electrical connection, earthing, and fused isolator requirements.
Important note about the appliance's horizontal position and flue incline.
Step-by-step guide for installing the boiler with a rear flue outlet.
Step-by-step guide for installing the boiler with a side flue outlet.
Specific instructions for installing vertical flue kits, including length limits.
Instructions for installing twin flue pipe systems, including eccentric types.
Instructions for installing the concentric 80/125 flue system.
Guidelines for making the gas supply connection to the boiler.
Steps for connecting the central heating flow and return pipes.
Instructions for connecting the domestic hot water inlet and outlet.
Checks for gas supply integrity, soundness, and purging.
Preliminary checks for electrical safety and system integrity.
Steps for filling the central heating system and purging air.
How to set the central heating system's design pressure.
Steps for safely lighting the boiler and initial operation.
How to check gas mains pressure at the boiler inlet.
Steps for measuring and adjusting CO2 levels for optimal combustion.
How to test and regulate domestic hot water flow rate and temperature.
What the installer must explain to the homeowner about the boiler and system.
Prerequisites and safety measures before replacing boiler parts.
Instructions for removing and replacing the gas valve.
