Need help?Do you have a question about the Raycap RCMDC-6627-PF-48 and is the answer not in the manual?
General| Product Type | Surge Protective Device (SPD) |
|---|---|
| Voltage Rating | 48 V DC |
| Maximum Continuous Operating Voltage (MCOV) | 60 V DC |
| Maximum Discharge Current (Imax) | 20 kA |
| Nominal Discharge Current (In) | 10 kA |
| Response Time | < 25 ns |
| Mounting Type | DIN Rail |
| Operating Temperature Range | -40°C to +85°C |
| Enclosure Rating | IP20 |
| Connection Type | Screw Terminal |
| Technology | MOV |
Essential safety precautions and warnings for product operation and installation.
Requirements and qualifications for installers and site preparation.
List of tools and supplies necessary for the installation process.
Steps to open enclosure clamps and remove the lid for access.
Instructions for preparing cable glands for weatherproofing the enclosure.
Process for feeding conductors and securing them with the compression nut.
Feeding the hybrid trunk and connecting wires to power connectors.
Routing hybrid jumper cables through the unit's insert.
Wiring output connections according to the Verizon Wireless color guide.
Connecting fiber optic cables to the connection panel and feeding them through guides.
Connecting fiber optic cables to the connection bar, starting from the back.
Connecting -48V and RTN jumper wires between OVPs for vertical installation.
Installing insulator caps and completing the 2-circuit vertical connection for the kit.
Connecting -48V and RTN jumper wires between OVPs for horizontal installation.
Installing insulator caps and completing the 2-circuit horizontal connection for the kit.
To Next Page
