Need help?Do you have a question about the RAYLASE MINISCAN II-10 and is the answer not in the manual?
Specifies the intended use of the deflection unit for laser radiation within material processing.
Lists improper uses of the deflection unit that can lead to hazards or damage.
Explains laser system classification according to DIN EN 60825-1 and DGUV Regulation 11.
Defines the laser area and safety requirements for marking and protective mechanisms.
Details hazards related to laser radiation and measures to prevent uncontrolled escape.
States that only trained personnel should operate the deflection unit.
Outlines the need for protective equipment based on laser hazards.
Provides instructions for handling situations involving damaged ZnSe lenses and associated hazards.
Lists key technical specifications for the deflection unit.
Lists key technical specifications like resolution, repeatability, and IP-code.
Specifies the voltage, current, and ripple/noise requirements for the power supply.
Details the analogue and digital control signal specifications.
Highlights electrical, laser radiation, and falling unit hazards during installation.
Details critical safety measures and warnings for start-up and ongoing operation, including handling of mirrors and laser beams.
General| Type | Galvanometer Scanner |
|---|---|
| Aperture | 10 mm |
| Scan Angle | up to ±20° optical |
| Wavelength Range | 1064 nm |
| Input Voltage | ±15 V DC |
| Interface | analog |
| Dimensions | 60 mm x 60 mm |
To Next Page
