How to troubleshoot poor marking quality on RAYLASE SS-II-15?
Poor marking quality with your RAYLASE Scanner can stem from a defective power supply or incorrect marking parameters. Begin by checking the power supply. If the power supply is functioning correctly, verify the marking parameters to ensure they are correctly configured.
What to do if there is no laser beam from RAYLASE SS-II-15, although process started from PC?
If there's no laser beam despite starting the process from your PC, a blocked beam path could be the reason. Ensure that you remove the protective cover from the beam input and/or output.
Why are the X and Y axis reversed on my RAYLASE SS-II-15?
Incorrect cabling may cause the X and Y axis to be reversed.
Ensures safe operation and protection of the surrounding area from laser radiation hazards.
Describes the deflection unit's inability to block beams and the need for a shutter for safety.
Explains laser danger class definitions according to DIN EN 60825-1.
Defines the laser area for accident prevention and its marking requirements.
Explains how to use the rating plate code to identify the specific deflection unit model.
Describes the unit's function to deflect laser beams in X and Y directions within a marking field.
Details the F-Theta lens's role in focusing beams and compensating for distortion.
To Next Page
General