Raymarine Dragonfly-4 - Page 75

2.Usetheon-screenkeyboardtoentertherequired
nameforthenewgroup.
3.selectSAVE.
Renamingawaypointgroup
WiththeWaypointgrouplistdisplayed:
1.Selectthegroupyouwanttorename.
Groupdetailsaredisplayed.
2.SelectRenameGroup.
Theon-screenkeyboardisdisplayed.
3.Usingtheon-screenkeyboardchangethegroup
nameasrequired.
4.SelectSAVE.
Assigninganewsymboltoawaypointgroup
Youcanassignanewwaypointsymboltoallthe
waypointsinagroup.
FromtheWaypointgrouplist:
1.Selectthegroupthatyouwanttoassignanew
waypointsymbolto.
Agroupdetailslistisdisplayedshowingall
waypointsintheselectedgroup.
2.SelectAssignSymbol.
Alistofallavailablesymbolsisdisplayed.
3.Selectthesymbolthatyouwanttouseforthe
waypointsintheselectedgroup.
Aconrmationdialogisdisplayed.
4.SelectYestoapplythenewsymbolstothe
waypoints,orselectNotocancel.
Movingawaypointtoadifferentgroup
WiththeWaypointsgrouplistdisplayed:
1.SelectALLWAYPOINTS.
Alistofallwaypointscurrentlyonyoursystemis
displayed.
2.Selectthewaypointyouwanttomove.
Thewaypointdetailspageisdisplayed.
3.SelecttheGroupeld
Alistofallgroupsisdisplayed.
4.SelecttheGroupthatyouwanttomovethe
waypointto,or
5.SelectCreateNewGrouptomovethewaypoint
toanewgroup.
Thewaypointismovedtotheselectedgroup.
Movingallwaypointsinagrouptoadifferent
group
Youcanmoveallwaypointsinagrouptoadifferent
group.
WiththeWaypointsgrouplistdisplayed:
1.SelecttheGroupthatcontainsthewaypointsyou
wanttomove.
2.SelectMoveWpts.
Alistofallgroupsisdisplayed.
3.Selectthegroupfromthelistthatyouwantto
movethewaypointstoo.
Aconrmationdialogisdisplayed.
4.SelectYestomovethewaypointsorNoto
cancel.
Thewaypointshavenowbeenmovedtothenew
group.
Erasingallwaypointsinagroup
Youcaneraseallwaypointsinaselectedgroup.
Withthewaypointgroupslistdisplayed:
1.Selectthegroupthatcontainthewaypointsyou
wanttoerase.
Alistisdisplayedshowingallwaypointsinthe
selectedgroup.
2.SelectEraseWpts.
Aconrmationdialogisdisplayed.
3.SelectYestoeraseallwaypointsinthegroup,or
Notocancel.
Allofthewaypointsintheselectedgroupareerased
fromthesystemandthegroupwillnowbeempty.
Erasingawaypointgroup
Beforeyoucaneraseawaypointgroupyoumust
moveoreraseallthewaypointsassignedtothat
group.
WiththeWaypointGroupdisplayed:
1.Selectthewaypointgroupthatyouwanttoerase.
2.SelectEraseGroup.
Thegroupisdeletedfromthesystem.
Waypointinformation
Whenyoucreateawaypoint,thesystemassigns
informationregardingthelocationmarked.Youcan
viewandeditthedetailsofanywaypointthathas
beencreatedandstored.
Thefollowinginformationisassignedorcaptured
foreachwaypoint:
•Symbol(adefaultsymbolisassigned,oryoucan
selectanalternative.)
Chartapplication
75