Need help?Do you have a question about the Raymarine E70234 and is the answer not in the manual?
Highlights critical warnings for high voltage, grounding, power, ignition, radar, sonar, and touchscreen safety.
Discusses factors for unit placement, including ventilation needs and required separation from other equipment.
Explains how vessel construction, prevailing conditions, and mounting location impact GPS signal reception.
Details requirements for secure mounting surfaces and proper routing of cables, including bend radius.
Guidance on selecting a location for optimal viewing angles by temporarily powering up the display.
Specifies minimum safe distances from magnetic compasses to prevent potential interference with their readings.
Instructions for surface mounting the unit, including identifying cable routes and detaching the front bezel.
Step-by-step guide for cutting and fitting the unit for flush mounting, including template use.
Instructions for mounting the unit using a trunnion bracket, including marking, drilling, and securing.
Recommendations for power distribution via a panel, including dedicated drain wire for grounding.
Guidance on selecting appropriate breakers and fuses for product protection, consulting dealers for unsure arrangements.
Describes connecting the unit via a distribution panel or directly to the battery, with or without RF ground.
To Next Page
General
