SeaTalk
Network
Switch
Tie-wraps x (10)
No8 x 3/4 inch
pan-head self-
tapping screw
(x2)
Philips
screwdriver
3mm
(1/8 in)
Drill
Power
drill
HS
SeaTalk Network Switch
Installation Guide
www.raymarine.com
Welcome to the SeaTalk HS Network Switch
What's in the box?....
Tools Required
Intended Use
The intended application is for leisure marine boats and
workboats not covered by IMO/SOLAS carriage requirements.
HS
Where can I install the unit?
10˚ 10˚
MIN
MAX
-10
55
14
130
or
This guide shows how to install the Raymarine SeaTalk
Network Switch, which enables you to connect up to eight
instruments together using SeaTalk , an ethernet-based network,
for data sharing.
HS
HS
D7558_1
87046_2.fm Page 1 Thursday, January 24, 2008 2:53 PM
To Next Page
Need help?
General
