EasyManua.ls Logo

Raymond LVA805A+ - Starting, Pausing, and Cancelling Cycles

Default Icon
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11 / EN
Washing Machine / User’s Manual
4.7 Starting the programme
PressStart/Pausebuttontostarttheprogramme.
Programmefollow-uplightshowingthestartupofthe
programme will turn on.
Progress of programme
Progressofarunningprogrammecanbefollowedfromthe
ProgrammeFollow-upindicatorwiththelights"Running"and
"End/Cancel".
C
INFORMATIONS
Ifthemachinedoesnotpasstothespinningstep,automatic
unbalancedloaddetectionsystemmighthavebeenactivateddueto
theunbalanceddistributionofthelaundryinthemachine.
4.8 Loading door lock
There is a locking system on the loading door of the machine
that prevents opening of the door in cases when the water
levelisunsuitable.
Ifyouwanttoopenloadingdoorwhenthemachineisinuse,
press"Start/Pause"buttontopausethemachine."Door
Open"lightwillstartflashingwhenthemachineisswitched
toPausemode.Machinechecksthelevelofthewaterinside.
Ifthelevelissuitable,"DoorOpen"lightilluminatessteadily
within1-2minutesandtheloadingdoorcanbeopened.
Ifthelevelisunsuitable,"DoorOpen"lightturnsoffandthe
loadingdoorcannotbeopened.Ifyouareobligedtoopen
theloadingdoorwhenthe"DoorOpen"lightisoff,you
havetocancelthecurrentprogramme;see"Cancellingthe
programme".
Switching the machine to pause mode
Pressthe"Start/Pause"buttontoswitchthemachineto
pausemodewhileaprogrammeisrunning."Running"light
startsflashingontheProgrammeFollow-upindicatortoshow
thatthemachinehasbeenswitchedtothepausemode.
Whentheloadingdoorisreadytobeopened,"DoorOpen"
light will illuminate continuously.
Adding or taking out laundry
Press"Start/Pause"buttontoswitchthemachinetopause
mode.Whenthemachineisswitchedtopausemode,
"Running"lightflashes.WaituntiltheLoadingDoorcanbe
opened.OpentheLoadingDoorandaddortakeoutthe
laundry.
ClosetheLoadingDoor.Press"Start/Pause"buttontostart
the machine.
C
INFORMATIONS
Thedoorcanbeopenedifthewaterlevelissuitable.Dooropen
symbolflashesuntiltheloadingdoorgetsreadytobeopened.The
symbol’slightissteadywhenthedoorisreadytoopen.Youcan
open the door to add/take out laundry.
4.9 Cancelling the programme
Tocanceltheprogramme,turntheProgrammeSelectionknob
toselectanotherprogramme.Previousprogrammewillbe
cancelled."End/Cancel"lightwillflashcontinuouslytonotify
thattheprogrammehasbeencancelled.
C
INFORMATIONS
Ifyoustartanewprogrammeaftercancellingthepreviousone,
this new programme will start without draining the water in the
machine.
Ifyoumustcertainlyopentheloadingdoorwhenthe“Door
Open”lightisoff,youneedtouse“Spin+Pump”programme.See
“Spin+Pump”
Re-spinning the laundry
Unbalancedloadcontrolsystemcanpreventspinning
becauseofunbalancedloadoflaundryinthemachine.Ifyou
would like to spin again:
Rearrangethelaundryinthemachine.SelectSpin+Pump
programmeandpress“Start/Pause"button.
4.10 End of programme
"End/Cancel"lightontheprogrammefollow-upindicatorwill
lightuponcetheprogrammecomestoanend;and"Door
Open"symbolflashesfor1-2minutesuntilthedoorisready
toopen.When"DoorOpen"symbolissteadilyilluminated,the
doorcanbeopened.
Toturnoffthemachine,turnprogramselectionknobto"On
/Off"position.Takeoutyourlaundryandclosetheloading
door.Themachinewillbereadyforthenextrun.
4.11 Door Open
"DoorOpen"symbolisilluminatedwhenthedoorisready
toopen.Itflashesuntilthedoorgetsreadytoopen.Ifthe
"DoorOpen"symbolisnotilluminated,donotforcethedoor
toopen.Thesymbol'slightissteadywhenthedoorisready
to open.
4.12 Your machine is equipped
with a “Standby Mode”
Incaseofnotstartinganyprogrammeorwaitingwithout
making any other operation when the machine is turned on
byOn/Offbuttonandwhileitisinselectionsteporifnoother
operation is performed approximately 2 minutes after the
programmeyouselectedhascometoanend,yourmachine
willautomaticallyswitchtoenergysavingmode.Brightnessof
indicatorlightswilldecrease.Also,ifyourproductisequipped
withadisplayshowingtheprogrammeduration,thisdisplay
willcompletelyturnoff.IncaseofrotatingtheProgramme
Selectionknoborpressinganybutton,lightsanddisplay
willrestoretotheirpreviouscondition.Yourselectionsmade
whileexitingtheenergysavingmodemaychange.Check
theappropriatenessofyourselectionsbeforestartingthe
programme. Readjust if necessary. This is not a fault.