Raynor Safety Signal 3850RGD User Manual

GARAGE DOOR OPENER
Model 3850RGD
For Residential Use Only
Owner’s Manual
■ Please read this manual and the enclosed safety materials carefully!
■ Fasten the manual near the garage door after installation.
■ The door WILL NOT CLOSE unless the Protector System
®
is connected and properly aligned.
■ Periodic checks of the opener are required to ensure safe operation.
■ The model number label is located under the light lens on the left side panel of your opener.
C
o
m
p
a
t
i
b
l
e
w
i
t
h
S
e
e
P
a
g
e
2
9
f
o
r
D
e
t
a
i
l
s
Raynor Garage Doors
1101 E. River Road
Dixon, Illinois 61021
www.raynor.com
STANDBY POWER
TM

Raynor Safety Signal 3850RGD Specifications

General

Brand	Raynor
Model	Safety Signal 3850RGD
Category	Garage Door Opener
Language	English

Summary

Assembly

Installation

Important Installation Instructions

Key warnings and instructions for safe and proper garage door opener installation.

Determine the Header Bracket Location

Install the Header Bracket

Attach the Rail to the Header Bracket

Position the Opener

Hang the Opener

Install the Smart Control Panel™

Install the Lights

Electrical Requirements

Covers electrical connections, grounding, and outlet requirements.

Install The Protector System® (Safety Sensors)

Installs and aligns the safety reversing sensors.

Installing the Brackets

Mounting and Wiring the Safety Reversing Sensors

Connects and wires the safety reversing sensors to the opener.

Aligning the Safety Reversing Sensors

Steps for properly aligning the safety reversing sensors for correct operation.

Fasten the Door Bracket

Adjustment

Program the Travel Limits

Sets the open and close points for the garage door opener.

Setting the Force

Adjusts the opener's force settings for safe and proper door operation.

Test the Safety Reversal System

Verifies the garage door opener's safety reversal mechanism functions correctly.

Test The Protector System® (Safety Sensors)

Confirms the safety reversing sensors are operational and aligned.

Operation

Important Safety Instructions

Essential safety guidelines for operating the garage door opener.

Using Your Garage Door Opener

Using the Wall-Mounted Door Control

Using the Remote Control

Standby Power

Manual Door Operation

To Open the Door Manually

Troubleshooting

Having a Problem (Troubleshooting)

Common issues and their solutions for the garage door opener.

Diagnostic Chart

Lists diagnostic codes and their meanings for troubleshooting.

Programming

To Add or Reprogram a Hand-held Remote Control

Instructions for programming remote controls to the opener.

To Add, Reprogram or Change a Keyless Entry PIN