Raytheon NAUTOPILOT 2010 User Manual

Contains important safety notes, attention points, and cautions for operation.

Procedures for handling sensor failures during high-speed operation.

Steps to take when autopilot errors occur during high-speed operation.

Addresses risks during acceleration, course changes, and heavy seas.

Guidance on heading changes and sea conditions at high speeds.

Provides a general overview of the NP2010 autopilot system.

Lists and describes the various operating modes of the autopilot.

Overview of the NP2010's operating features and general principles.

Details the passive mode operation when the selector is in HAND.

Explains the active mode operation with the selector in AUTO.

Describes how to operate the autopilot in Heading Control mode.

Explains how to use the Track Control operating mode.

Details operation using the Rate-of-Turn Tiller.

Discusses the management and use of multiple operator units.

Covers remote operation and heading control with external transmitters.

Explains pre-adjustments for heading and track changes.

Describes synchronization process for gyro compass course.

Covers the functionality of various general function keys.

Details the use of function keys for system management and parameter settings.

Covers system messages, including alarms and warnings.