05. Electrical maintenance
Owner manual
MicroEIVA:
MicroEIVA is a display connected to the controller. It is used
to turn on and off the electrical system and it is capable
of configuring parameters such as pedalling assistance or
turning on the lights. MicroEIVA works as an accessory to
the EIVA 2.0 App. For more information see the “MicroEIVA
manual”.
End Plug:
Rayvolt Cruzer wiring is designed to work with a MicroEIVA
device, therefore, when it is not installed on the bike, an End
plug is needed to close the electrical circuit. It works as a
closed switch.
To Next Page
Loading...
