07. Troubleshooting description
Owner manual
Troubleshooting
description
Note that there is the option of a faulty wire that
will be the source of the problem, so verify that the
condition of all wiring is correct and that the circuit
has power. You will then test your scenario solution.
Scenario 1:
Bike doesn’t turn on and three lights on the throttle
are off, no microEIVA installed.
1. Battery not connected:
First of all, take out the battery case of its position. Open it
and check that inside is everything connected and there
are not loose connections. After that, close again the case
and place it correctly, ensuring that there is a full contact
between the battery case and the lower pins on the
frame. Lock the battery in the correct position.
2. A blown fuse:
Take out the battery case of its position. Remove both
To Next Page
Loading...
