9. SAFETY AND MAINTENANCE
SAFETY GUIDELINES
To achieve maximum safety while using your Razer Aether Lamp Pro, we suggest that you adopt the
following guidelines:
▪ Should you have trouble operating the device properly and troubleshooting does not work,
unplug the device and contact the Razer hotline or go to support.razer.com for assistance.
▪ Don't take apart the device and attempt to operate it under abnormal current loads. Doing so
will void your warranty.
▪ Don't replace the light source of this device. This should only be replaced by the manufacturer,
service agent, or a similarly qualified person.
▪ Only use the device indoors.
▪ Don't use or install the device near water, moisture, solvents, or other wet surfaces, nor
expose it to high temperatures or direct sunlight.
▪ Keep the device away from liquid, humidity or moisture. Operate the device only within the
specific temperature range of 0°C (32°F) to 40°C (104°F). Should the temperature exceed this
range, unplug and/or switch off the device to stabilize the temperature to an optimal level.
MAINTENANCE AND USE
The Razer Aether Lamp Pro requires minimum maintenance to keep it in optimum condition. Once a
month, we recommend you clean it using a soft cloth to prevent dirt buildup. Don't use soap or harsh
cleaning agents.
To Next Page
Loading...
