5. SETTING UP YOUR RAZER LANCEHEAD
CHARGING YOUR RAZER LANCEHEAD
Using the included USB to Micro-USB cable, plug your Razer Lancehead to the computer.
o
Thisconnection also acts as the wired mode for your Razerdevice.
For best results, please fully charge your Razer Lancehead before using it for the first time. A
depleted battery will be fully charged in approximately hours. If the Razer Lancehead has not
been used for an extended period, you may need to recharge it before use.
The Razer Lancehead requires a USBconnection that is able to supply sufficient power to charge
the battery. The battery charging process of the Razer Lancehead may be affected if connected to a
non-powered USB hub or non-powered USB ports found on certain keyboards and other
peripherals. When in doubt, it is preferable to connect the Razer Lancehead directly to the USB port
of your computer.
LOW POWER INDICATOR
The Razer Lancehead's scroll wheel will blink red twice in repeated intervals to indicate that the
battery's power is less than 15%.This lighting sequence will repeat until the battery is drained or
the mouse is connected to the PC via the USB to Micro-USB cable.
O TheindicatorpercentagecanbecustomizedusingRazersoftware
FOR GAMERS. BY GAMERS:
7
To Next Page
Loading...
