Page 2 of 3 12.19.13
Button is pushed IN = Saftey ON/Motor will not engage when foot pedal is applied
Make sure safety button is in the "ON" position
Gently press down on the bottom of the foot pedal
(throttle)
Saftey button is in the "OFF" position
Button is pushed OUT = Safety OFF/Motor will engage when foot pedal is applied
Unit does not work
Note: Make sure rider is safely seated in unit with
safety belt on before applying the foot pedal (throttle)
Check underneath frame for any damage to the foot
pedal (throttle) and/or wires
If unit won't start after releasing the
foot pedal (throttle)
Gently press down on the bottom of the foot pedal
(throttle)