Razor E250 - User Manual

Need help?

Do you have a question about the Razor E250 and is the answer not in the manual?

Overview

Function Description
Important Technical Specifications
Usage Features
Maintenance Features

This document is a user manual for the Razor E200, E200S, and E250 Electric Scooters. It provides essential information for assembly, operation, maintenance, and safety.

Function Description:

The Razor E200, E200S, and E250 are electric scooters designed for recreational use. They are powered by an electric motor and battery, offering an alternative mode of personal transportation. The scooters feature a twist-grip throttle for speed control and a hand-operated brake for stopping. The E200S model includes a seat for a different riding experience.

Important Technical Specifications:

Recommended Rider Age: 13 years and older.
Maximum Rider Weight: 70 kg (154 lbs).
Tire Pressure: 36 PSI (248 kPa).
Battery Type: Sealed non-spillable lead-acid batteries (recyclable).
Charging Time: At least 12 hours for initial charge and subsequent charges.

Usage Features:

Assembly: The manual details a multi-step assembly process, including attaching the handlebars, connecting electrical wires, and, for the E200S, installing the seat.
Operation:
- Starting: The scooter is turned on via an ON/OFF switch. Speed is controlled by a twist-grip throttle on the handlebar.
- Stopping: A hand-operated brake lever is used to slow down and stop the scooter.
- Riding Environment: Designed for use on flat, dry surfaces free of loose debris. Riders are advised to avoid wet, slick, bumpy, uneven, or rough surfaces, as well as mud, ice, puddles, or water.
- Safety Precautions:
  - Always hold handlebars while riding.
  - Do not touch brakes or motor immediately after use as they can be hot.
  - Avoid high speeds, especially downhill.
  - Do not ride at night or when visibility is limited.
  - Do not attempt stunts or tricks.
  - Only one rider at a time.
  - Keep hands, feet, hair, body parts, clothing, or similar articles away from moving parts, wheels, or drivetrain.
  - Do not use headphones or cell phones while riding.
  - Never hitch a ride with a vehicle.
  - Always wear appropriate protective equipment, including an approved safety helmet (with chin strap securely buckled), elbow pads, and kneepads. Long-sleeved shirts, long pants, and gloves are recommended.
  - Always wear athletic shoes (lace-up with rubber soles); never ride barefoot or in sandals. Keep shoelaces tied.
Charging:
- The scooter features a charging port.
- The charger connects to a standard electrical outlet.
- An indicator light on the charger shows charging status (e.g., red for charging, green for charged).
- The scooter must be turned OFF during charging.
- Do not store the battery in freezing temperatures.
- Only use the Razor-recommended charger.
- The charger is not a toy and should be operated by an adult.
- Unplug the charger from the wall and scooter when not in use or when cleaning.
- Do not exceed the recommended charging time.

Maintenance Features:

Pre-Use Check: Before each use, confirm that all chain guards or covers are in place and in serviceable condition, the brake is functioning properly, and tires have sufficient tread. Ensure the rear wheel has no flat areas or excessive wear.
Tire Inflation: Maintain correct tire pressure (36 PSI / 248 kPa) using a pump with a gauge.
Brake Adjustment: The manual provides instructions for adjusting the brakes by tightening or loosening the cable. This involves ensuring a specific gap (.25" / 6mm MAX) between the brake lever and the handlebar when the brake is engaged.
Front Wheel Replacement: Detailed steps are provided for replacing the front wheel, including removing the old wheel, installing the new one, and reattaching components. This involves using tools to loosen and tighten nuts and bolts.
Chain and Rear Wheel Replacement: Comprehensive instructions are given for replacing the chain and rear wheel. This multi-step process includes removing the chain guard, detaching the chain, removing the rear wheel, installing the new chain and wheel, and reassembling all components. This also involves using tools to loosen and tighten various fasteners and adjust chain tension.
General Maintenance:
- Maintain and repair the scooter according to the manufacturer's specifications.
- Use only manufacturer's authorized replacement parts.
- Do not modify the scooter from its original design and configuration.
- Disconnect the scooter from the charger before wiping it down or cleaning with a damp cloth.
Battery Care: The manual emphasizes that the scooter contains sealed non-spillable lead-acid batteries that must be recycled. It also warns against modifying the electrical system or using the wrong type of battery/charger, as this could cause fire or explosion.