Calibrating Hovertrax 2.0
3
While keeping the product level, turn power ON and HOLD until
product beeps and lights flash (approximately 15-20 seconds).
2 Manually adjust the platforms so they are level to the ground.
1 Place Hovertrax 2.0 on a level surface.
Need Help? Visit our web site at www.razor.com or call 1800 244 543 or
email: info@funtastic.com.au Monday - Friday 9:00 AM - 5:30 PM.
HOVERTRAX 2.0/DLX 2.0
CALIBRATION INSTRUCTIONS
2
To Next Page
Loading...
