5
Installing/Replacing the Spark/Skid Pads
Friction during sparking will eventually wear out the replaceable Spark Pads and cause the Jetts to stop making
sparks. Worn out Spark Pads should be replaced to avoid damaging the Jetts.
WARNING: Adults must assist children in replacing Spark Pads.
WARNING: Do not attempt to replace Spark Pads immediately after using as Spark Pads will be hot.
Handle only when cool.
SET-UP
1 To remove spark or Skid
Pads, press the button as
shown and pull the frame to
its maximum width.
2 Push the right and left pads
as shown.
3 Push the replacement pads into
the slot as shown.
To Next Page
Loading...
