EasyManua.ls Logo

Razor jetts - Pre-Ride Checklist; Wheels and Hardware Check; Safety Gear and Legal Compliance

Razor jetts
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
PRE-RIDE CHECKLIST
Wheels
Impacting the wheels against any hard surface can damage the wheels. Wheels are not covered
under your limited warranty.
Hardware/Loose Parts
Check and secure all fasteners before every ride. Make sure the strap is adhered properly in
place before using. There should not be any unusual rattles or sounds from loose parts or broken
components. If the unit is damaged, do not use. Reference “Safety Warnings” on pages 1 and
2 of this manual.
Safety Gear
Always wear proper protective gear, such as an approved safety helmet. Elbow pads and kneepads
are recommended. Always wear closed toe shoes (lace-up with rubber soles) and keep shoelaces
tied and out of the way of the wheels. NEVER USE WHILE BAREFOOTED OR IN SANDALS.
Laws and Regulations
Always check and obey any local laws or regulations.
Be Careful!
This product is not for aggressive or trick use. Avoid steep inclines and don’t roll too fast — you
can lose control and fall. Skate parks are not designed for young users. Never use in traffic or on
the street and watch your surroundings for pedestrians, bikers, boarders and skaters.

Other manuals for Razor jetts

Related product manuals