Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.
2
Figure 5
Using both hands, carefully remove the batteries
from the battery tray. See page 3 for battery care
and disposal information.
Reverse steps:
1. Place the new battery inside battery tray.
2. Re-fasten the battery bracket around the battery
using the two bolts.
3. Reconnect the white battery plastic connector.
4. Reattach fairings on unit using previously
removed bolts.
ATTENTION: Charge unit at least 18 hours
before riding.
Step 5 Step 6
Figure 3 Figure 4
Locate the white plastic connector that leads to
the battery and disconnect by depressing the tab.
Using a 4mm Allen wrench, loosen the two bolts
on the battery bracket and remove the bracket
from the battery.
Step 3 Step 4
To Next Page
Loading...
