6
HEADLINEASSEMBLY AND SET-UP
6
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
Attaching and Removing the Seat
Attaching the Seat
1 Turn the seat lock knob counterclockwise to remove
from the seat clamp. Set seat lock knob aside.
3 Align the seat with the square mounting holes on the
steering tube. There are two possible positions for the
seat, High and Low. Once seat is aligned slide the seat
clamp onto the seat.
2 Pull seat clamp away from the seat. Set seat
clamp aside.
To Next Page
Loading...
Need help?
General
