BEFORE YOU BEGIN
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
2
Remove contents from box. Inspect the contents of the box for scratches and/or dents that may have occurred during
shipping. Because your scooter was partially or fully assembled and packed at the factory, there should not be any
problems, even if the box has a few scars or dents.
WARNING:
DO NOT USE NON-RAZOR
PRODUCTS WITH YOUR SCOOTER.
Razor scooters have been builtto
certain Razor design specifications.
The original equipment supplied at
the time of sale was selected on
the basis of its compatibility with
the frame, fork and all other parts.
Certain aftermarket products may
not be compatible and will void
the warranty.
Product ID Locations:
(See locations to the left)
1. Side of Deck Plate
2. Box - Side of UPC (Not Shown)
Required Tool
5 mm Allen Wrench
(Included with S, T and A4 Kick
Scooters only)
Box Contents:
• Scooter
• Allen Wrench (Select
Models Only)
• Owner’s Manual
T-bar
Collar Clamp
Quick-Release Lever
(Select Models Only)
Rear-Fender Brake
Extension Tube
(Select Models Only)
Joint Release Lever/
Pivoting Mechanism
(Select Models Only)
Steering Column Adjusting Screw (A4 Only)
1.
To Next Page
Loading...
Need help?
General
