Razorweld JRWPC45LT - Advanced Cutting Operations; Piercing Technique

14
● Piercing
Hold the torch at an angle to the work piece,
pull the trigger to start the arc and slowly
rotate it to an upright position.
When sparks are exiting from the bottom of
the work piece, the arc has pierced through
the material.
When the pierce is complete, proceed with
cutting.
● Safety Trigger Operation
The Suregrip TRF-45-6-CC1 torch supplied with the RazorCut 45 machine has a new design of safety trigger.
Just pull back on the trigger whilst increasing your grip and you will feel the trigger move to the on position.
When you release the pressure it will return to the off position.
off
on
off
Operating Procedure & Techniques
for PLASMA Cutting
Razorweld
Razorweld
™™
™
™
MODEL JRWPC45LT Torch Parts: Codes and Pack Qty
RAZORWELD CUT 45 Plasma
JASIC Technologies America Inc
25503 74th Ave S Kent WA 98032 USA
Phone: +1 253-859-6277 / +1 253-859-6278
Fax : +1 253-859-6286
e-mail: sales@razorweld.com
Razorweld
Torch Model
Part Number Description EAN CODE
TRF45-6--CC1 19Ft Suregrip TRF Plasma Cutting Torch
0680474943869
Cutting Nozzles
Part # Description QTY EAN CODE
RWPD-0116-8 Cutting Nozzle 5/Pack 0680474943876
Cutting Electrodes
Part # Description QTY EAN CODE
RWPR-0110 Cutting Electrodes 5/Pack 0680474943883
Retaining Cap
Part # Description QTY EAN CODE
RWPC-0116 Nozzle Retaining Cap 1 0680474943906
RWPE-0106 Swirl Ring 1 0680474943890
Part# Description QTY EAN CODE
RWSC-2551 Buggy 1 0680474943913
Swirl Ring
Part# Description QTY EAN CODE
Buggy
These quality parts are manufactured in China and are oered as replacement parts
suitable for the TRAFIMET S45 Plasma torch.
Our Plasma cutting nozzles and Plasma cutting
electrodes are sold in packs of 5 ,
Stand o springs in packs of 2, all other products are
sold as individual items. All plasma cutting items are
available in attractive clam shell packaging if required.
Stando guide
Part# Description QTY EAN CODE
RWCV0010 Stand o guide 2/Pack 0680474945535