8
Product Code: JRWPC45LT
Standard Package includes: RAZORCUT45 Machine, TRF-45-6-CC1 x 19ft Plasma Torch, Earth Lead 5/8" x 13ft
Technical Data
Power Supply / Phases (V-Ph) 230v - 1 +/- 15%
Duty Cycle @ 104°F 30% @ 45Amps
Rated Power (KVA) 5.50
Output Current Range (A) Plasma 20-40
Rated Output Voltage (V) 96
Efficiency (%) 90
Insulation Class H
Protection Class IP21S
Plasma Arc Starting Piolt L/F
Air Flow Pressure (MPA) 0.5 (75 psi)
Air Flow Rate (CFM) 6.70
Cutting Thickness - Clean (Inch) 5/8
Cutting Thickness - Severance (Inch) 25/32
Dimensions (inch) 18.1" x 6.69" x 12.99"
Weight (Pounds) 20.2
Warranty 3 years machine only
Certification Approval CAN/CSA E60974-1 &
ANSI/IEC 60974-1
Overview
The RAZORCUT45 is an inverter-based Plasma cutting machine produced using the latest in IGBT technology. This
machine is reliable, robust and stacked with features that you can expect from a quality Plasma Cutter. The RAZORCUT45 produces a
high temperature plasma stream providing effortless cutting of all electrically conductive materials including steel, cast Iron,
stainless steel, copper, aluminium brass etc . The RAZORCUT45 is equipped with a high quality SureGrip TRF-45-6-CC1 Plasma
torch with Euro connection,developed specifically to enhance and improve the cut quality of the RAZORCUT45 machine. Connection
of the TRF-45-6-CC1 Plasma torch provides effortless starting of the cut with powerful, fast and accurate cutting capability, additional
is the benefit of longer life cycle consumable electrodes and cutting tips. The RAZORCUT45 is an exceptional machine that is suitable
for a wide range of applications including sheet metal fabrication, light industrial use, site work, automotive, ducting work, repair and
maintenance services. The RAZORCUT45 is packaged with a tough SureGrip TRF-45-6-CC1 Plasma torch, earth lead and air
regulator. The RAZORCUT45 gives you the best of both worlds great portability, with the power to get the job done. Built to our
specification and manufactured in compliance to CAN/CSA E60974-1 & ANSI/IEC 60974-1
Features
• Latest IGBT Inverter Technology
• Safe Euro torch connection
• High quality TRF-45-6-CC1 Plasma torch
• Industrial application
• Tolerant to variable power supply
• In-built Air Regulator with preset air pressure
• Suitable to cut all electrically conductive materials
• Light weight and compact
• Strong metal housing
45 Amp - 5/8" Cut on Steel
230v Inverter with Power Factor Correction
Industrial Rated, Lightweight and Portable
RAZOR CUT 45
Plasma - 45 Amp Inverter Plasma Cutter
Cuts: Steels, Stainless, Cast Iron, Brass, Copper. Aluminium
50505-48
Sub-Micronic Cartridge
Option
50500-12
Sub-Micronic Air Filter
Option
To Next Page
Loading...
