RB Concept engines - User Manual

RB Products constantly improves its products, therefor changes can be made without prior notice. RB Products cannot
be held responsible for any kind of damage or injury during building, storage, use or abuse of any of its products.
RB Concept engines is a brand of R&B Products Allevard FRANCE Tel:(33) 476.45.09.29 Fax:(33) 476.45.16.30
www.rbproducts.com
Instruction
Manual

Summary

Safety

Parts and Equipment

Fuel

Guidelines for using commercially available fuel, including recommended nitro content and proper fuel handling.

Air Filter

Importance of a properly maintained air filter for engine life and performance; instructions on cleaning and replacement.

Carburetor

Main Needle

Explains the function of the main needle in controlling fuel mixture at full throttle and its adjustment direction.

Idle Needle

Describes the idle needle's role in controlling fuel mixture at closed throttle and its adjustment procedure.

Idle Air Screw

Explains the idle air screw's function in adjusting idle RPM by controlling the throttle opening gap.

Adjustable Spray Bar

Details the adjustable spray bar and advises on its adjustment, recommending beginners leave it flush.

Glowplug

Exhaust System

Starting Equipment

Installation

Mounting the Engine in the Car

Detailed steps for mounting the engine, including ensuring flat engine mounts and correct gear mesh alignment.

How to Start Your Engine

Running-in Procedure

Carburetor Settings

Pre Adjustments

Detailed steps for pre-adjusting the main needle, idle RPM, and idle needle for initial engine tuning.

Final Adjustments While Driving

Instructions for making final carburetor adjustments on the track, focusing on the main needle and temperature checks.

Maintenance

Warranty

Cautions

Dos and Donts

Notes

RB Concept engines Specifications

General

Brand	RB
Model	Concept engines
Category	Engine
Language	English