To Next PageTo Next Page
Need help?Do you have a question about the RC LEVELIZA and is the answer not in the manual?
Power| voltage range | 90 - 264 V AC |
|---|---|
| frequency | 47 - 63 hz |
| current draw | up to 60mA |
Audio Specifications| typical input level | Designed to be compatible with "line level" pro audio equipment |
|---|---|
| maximum unbalanced input before clip | 10V RMS |
| maximum balanced input before clip | 20V RMS |
Weight and Dimensions| dimensions | Standard 19 inch 1U rack case by 250mm deep |
|---|---|
| weight | Approx 3kg |
Describes what the LEVELIZA is intended for in audio signals to maintain perceived loudness.
Explains that the LEVELIZA is not a limiter, compressor, or AGC, and does not affect dynamic range.
Notes its focus on perceived loudness, with less concern for bass and sub frequencies.
Control used for manual attenuation of the input signal.
Control to define the maximum desired output level.
Control that adjusts the speed and responsiveness of the gain adjustment.
Hidden adjustments to limit the maximum output threshold for security.
Describes mains power connection via IEC and audio inputs/outputs via XLR.
Recommends inserting the unit between the DJ mixer and the PA desk/sound system.
Step-by-step guide for setting threshold and assertiveness controls.
Temporarily increase assertiveness for accurate adjustments during an event.
Adjust input gain to maintain consistent output even if DJ plays below threshold.
High dB attenuation levels do not affect the sound quality or performance.
Increase assertiveness for quick recalibration during DJ changes or source shifts.
Use higher assertiveness for more consistent output with variable music levels.
Procedure to secure threshold levels via hidden presets, restricting front panel access.
Covers dimensions, weight, power requirements, and connection types.
Details compatibility with line level and maximum input before clipping occurs.
Details the one-year full parts and labour warranty for product faults.
Availability of repair facility, spare parts, and technical support after warranty expiry.
