RCA 15491880 - Connection: TV + VCR

Connections & Setup
TV (back panel)
FromCabie
or Antenna
Connection: TV + VCR
1. Connect your TV to your VCR
,
.
A. Connect a coaxial cable to the CABLE/ANTENNA jack on your TV and to the Output Jack on
your VCR (sometimes labeled OUT TO TV).
B. Connect the attdio/video cables. Connect audio cables (white and red) to the AUDIO IN jacks
on the back of tbe TV (R and L/MONO) and to the Audio Output Jacks on the VCR (sometimes
labeled OUT R L).
C. Connect the video cable (yellow) to the VIDEO IN jack on the back of the TV and to the Video
Output Jack on the VCR.
Connect cable or antenna to your VCR
Connect tim coaxial cable from your cable outlet, cable box, or antenna to the Input Jack on your
VCR (sometimes labeled IN FROM ANTENNA or IN FROM ANT).
Connect the G-LINK cable to the TV
A. If you haven't already done so, remove the Demo Pin from the G-LINK jack.
B. Connect the G-LINK cable to the G-LINK jack on tbe TV. Next step, place one of the wands of
the G-LINK cable to work with your VCR(instructions are on p. 13).
Go to page 13
8 Chapter 1