TV 19LA30RQ is packaged with the TV stand separated from the cabinet. To setup the TV table stand, please carry out the
installation according to the instructions below.
The LCD panel is easy to scratch, so please:
1. Choose an absolutely flat surface to place the TV on.
2. Use soft cloth or cushion to face the TV panel.
Do not put TV on the table directly.
Always unplug the AC cord first when installing/removing the stand.
Align the four holes in TV stand body to the screwholes
in TV stand base.
Step One
Place the TV faced down on a soft cloth or cushion to prevent the LCD
panel from being damaged.
Step Three
Insert the four M4 machine screws (which are totally the same) and tighten them.
Step Two
Put the stand body (plastic) onto the stand base (steel) in cabinet.
TV Stand Installation
9
RS01TM408H
Pedestal Screws Quantity Part #
4pcsM4 x 8mm
To Next Page
Loading...
