RCA 20F524T - Plug in the TV and Turn It on; Put Batteries in the Remote; Use the Remote Control to Complete the Initial Setup

DIG•ANA
GUIDE
+•?
CH LIST
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
OK button
Arrow
buttons
Use the Remote Control to Complete
the Initial Setup
Thetechnicaltermis“Navigation”-howyoumovethroughtheon-screen
menus.Themethodisthesamethroughoutthemenuscreens:highlight
yourchoiceandselectit.
Tohighlightamenuitem,pressthearrowbuttonsontheremoteto
highlightoneof theitemslistedonthescreen.Usetheupordownarrow
buttontomoveupordown.Usetherightorleftarrowbuttontomove
rightorleft.
Toselecttheitemthatyou’vehighlighted,pressOK.
Note: Highlighted means that the menu item stands out from other
menu items on the list (appears darker, brighter or a different
color).
ON•OFF
button
Continues on next page...
Plug in the TV and Turn It On
Plugtheendof thepowercordintoagroundedwalloutlet.Inserttheplugcompletelyinto
theoutlet.PressON•OFFontheremote,orpressPOWERontheTV’sfrontpanel.
Put Batteries in the Remote
• Removethebatterycompartmentcoverfromthebackof theremotebypushingdown
andslidingoff thecover.
• Insert2fresh“AA”batteries.Makesurethepolarities(+and-)arealignedcorrectlytothe
diagraminsidethebatterycompartment.
• Replacethecover.
Note: If you won’t need to use your remote for a long period of time, remove the batteries to
avoid damage due to possible leakage.
Chapter 1 13
Connections & Setup