35
Reviewing Stored Names & Numbers
1. Press the DIR button.
2. Use the 5 and 6 button to review the records stored in Directory Memory. Or press
the number key to review the records with the name starting with the corresponding
alphabet.
OR
1. Press a One Touch dial button to review the record stored in Direct Access Memory.
Changing a Stored Name or Number
1. Press DIR.
2 . Use the 5 and 6 button to scroll to the desired memory.
3.
Press the Sel/Save button and edit the content according to the steps in the “Storing
a Name & Number in Memory” section.
OR
1. Press a One Touch dial button.
2. Press the Sel/Save button and edit the content according to the steps in the Storing a
Name and Number in Memory section.
Storing the Last Number Dialed
1. Press the Store button.
2. Press the Auto Redial button to view the last number dialed.
3.
Press the Sel/Save button to save the number.
4.
Follow the steps in the “Storing a Name and Number in Memory” section to continue
name editing and to save the record.
Storing a Pause
Use the #/Pause button (press twice) to insert a pause (displays as “P ”) when a delay is
needed in the dialing sequence (for example, when you must dial a 9 to get an outside
line or when you must enter codes to access your bank’s information line).
Memory
To Next Page
Loading...