TV 32LA30RQ is packaged with the TV stand separated from the cabinet. To setup the TV table stand, please carry out the
installation according to the instructions below.
Step One
Place the TV faced down on a soft cloth or cushion to prevent the
LCD panel from being damaged.
The LCD panel is easy to scratch, so please:
1. Choose an absolutely flat surface to place the TV on.
2. Use soft cloth or cushion to face the TV panel.
Do not put TV on table directly.
Always unplug the AC cord first when installing/removing
the stand.
Step Two
Put the stand body (plastic) onto the stand base in cabinet.
Align the four holes in TV stand body to the screwholes in TV
stand base.
/
/
Step Three
Insert the four M4 tapping screws (which are totally the same) and
tighten them.
Four black
stand screws
7
To Next Page
Loading...
Need help?
General
