DO NOT RETURN this product to the store! Visit
RCAAntennaHelp.com for instructional and how-to videos.
Note: If your TV’s antenna input
is already connected to a satellite
receiver, cable box, or digital
converter, connect the antenna’s
coaxial cable to the antenna input
jack on that device.
STOP!
Insert the power adapter into the
antenna’s DC jack. Plug the other end
into a wall outlet or power strip.
> Turn on your TV.
> Adjust the antenna’s UHF loop.
> Extend the antenna’s dipoles (rods)
and adjust them.
Note: Different channels may require
different antenna adjustments.
Use the RCA Signal Finder App
to nd the best location for your
antenna.
1
In the Google Play or Apple App Stores,
search for “RCA Signal Finder” and look for
the icon shown here. Then download and
install the App.
Launch the App and follow the directions
there to nd the best location and orientation
for your antenna.
Antenna Placement Tips
Avoid metal surfaces (like a metal stand).
Move the antenna close to or in a window.
Position the antenna as high as possible.
Connect the antenna to your TV.
2
Plug in the antenna.
3
4
Adjust your antenna for best
reception.
Most TVs have a channel scan option in their menu
system, many times in a SETUP or CHANNEL menu under
ANTENNA.
For detailed instructions on performing a channel scan,
see the owner’s manual that came with your TV.
Important: You must perform a channel scan to receive
any channels!
Scan for channels on your TV.
5
Loop
Check out setup videos at
www.RCAAntennaHelp.com
ANT310E QSG 03
Versión
en español
al dorso
AMPLIFIED
indoor HDTV antenna
QUICK START GUIDE
To Next Page
Need help?
General
