Eyepiece Focus Control
Electronic Viewfinder
Switch
Switch and
Indicator
A UTO Button
Tally Light
1
,
Place the CAMERA/PLAY
switch in CAMERA.
The position of this switch tells the
camcorder whether you want to
record (CAMERA) or play back
tapes (PLAY).
Turn on the power.
Slide the POWER switch to turn on
the camcorder. The POWER
indicator will light, and the
camcorder will enter the record-
pause mode. PAUSE and m appear
in the viewfinder when the
camcorder is in the record-pause
mode.
10. Set the controls to
automatic.
Press the AUTO button to set white
balance, shutter speed, and focus to
automatic.
11. Adjust the viewfinder and
eyepiece focus control.
• Rotate the viewfinder into a
comfortable operating position.
• Turn the eyepiece focus control to
adjust the focus of the viewfinder
for your vision.
12
To Next Page
Loading...
Need help?
General
