Use the Adapter/Charger to Power Your Camcorder
The adapter/charger attaches to the camcorder and lets you power your camcorder
directly from standard household power. The adapter/charger operates on 120 volts,
50/60 Hz, and can be used to power the camcorder or recharge the battery.
-|
on a power souree6ther!ith_
power
converters. They
CPS014,
POWER
Indicator
To AC 120V,
50/60 Hz
DC IN 9.6V
Jack
Adapter/
Charger
DC Cable
Attach Adapter/Charger
1. Attach one end of the adapter/charger's
DC cable to the DC OUTPUT jack on
the adapter/charger.
2. Attach the other end of the cable to the
DC IN 9.6V jack on the camcorder.
3. Plug the adapter/charger's plug into an
operating outlet. The POWER indicator
on the adapter/charger lights when it is
properly connected.
Notes: The adapter/charger cannot charge the
battery and operate the camcorder at the same
time. If you connect both, the adapter/charger
powers the camcorder. Remove the adapter/
14
charger's cable from the DC OUTPUT jack to
charge the battery.
When using the adapter/charger to power the
camcorder, the battery level indicator might dis-
play _ ]. This indicator is used for battery
operation and has no meaning when using the
adapter/charger to power the camcorder.
Remove Adapter/Charger
1. Unplug the adapter]charger from the
wall outlet.
.
Remove the DC cable from the adapter/
charger and camcorder.
To Next Page
Loading...
Need help?
General
