Dateand/ortimeor
titlewererecorded
ontape
Dateand/ortimeare
incorrect
Viewfinderturnsoff
andon
Camcorder does not
turn on and/or
function buttons will
not operate
• Displays are recorded on tape whenever they appear
in the viewfinder or on the LCD monitor. Remove
them from the viewfinder or LCD monitor when
recording. Seepages 22-23.
• When @ DATE or TITLE is selected, the display is
automatically recorded when you begin recording or
change the cassette. See pages 22-23.
• Title is recorded whenever it appears in the viewfinder
or LCD Monitor. Press the TITLER button to remove
the title from the viewfinder or LCD monitor. See
pages 44-46.
• Date or time may need to be set. See page 22.
• Clock lithium cell battery may need recharging.
See page 23.
• LCD monitor is open at least 45°. Viewfinder
automatically turns off. Monitor closed, viewfinder
turns on.
• During recording, viewfinder turns on when monitor
rotated around to face the subject.
• During playback, viewfinder turns off when monitor
rotated around and placed against camcorder.
Remove the power source.
After one minute press the
reset switch gently using a
nonmetallic pointed item,
such as a toothpick, until
you feel a click. This
resets the camcorder to the
factory settings and erases
the date, time, and custom
settings. Wait for at least
one minute after resetting
the camcorder to attach a
power supply.
Reset Switch
68
To Next Page
Loading...
Need help?
General
