RCA CD-9400 - Self-Diagnostics; Error Code U1: Disc Not Loaded Properly; Error Code U2: Mechanism Operation Error; Error Code U3: Rack Cover Error

18
SELF-DIAGNOSTICS
The CD-9400 has a self-diagnostic function. When the CD changer detects an abnormal condition, it displays an error
number on the display. If this happens, try the suggestion shown. If the error number still appears, take the CD changer to
your local RadioShack store for assistance.
Control
Page Number
The disc is not loaded
properly.
Mechanism operation error.
Rack cover error.
Suggestion
Load the label side to the left.
The CD might be dirty. Clean the CD.
Check to see if there is a foreign object in the slot.
Check to see if there is a foreign object in the slot.
Unplug the power cord and plug it in again.
Check to see if the rack cover is blocked by anything.
Unplug the power cord and plug it in again.
U1
U2
U3