RCA F27703

21
Setting Up Cable Box Channel
The CABLE CHAN function lets you
program to which channel the TV
will automatically tune when you
press the DSS•CABLE button on the
remote. This is handy if you want to
connect a DSS
®
receiver or other
satellite receiver, or if your cable
company requires you to connect a
cable box to your TV. You will no
longer have to remember the output
channel of the DSS
®
receiver or
cable box because the TV will
remember for you.
For example, if you connect a cable
box to the TV’s CABLE/ANTENNA
connector (as shown on page 25),
you will no longer have to remember
to select channel 2, 3, or 4 on the TV
to see what’s coming from the cable
box. By entering the cable box’s
output channel (usually 02, 03, or 04)
next to the CABLE CHAN function,
the TV will automatically tune to that
channel each time you press the
DSS•CABLE button on the remote.
This function is especially convenient
if you have a remote-controllable
cable box that can be operated by the
DSS•CABLE button on the remote (as
described on page 26). Pressing the
DSS•CABLE button will then not
only switch the remote to cable mode
but will also automatically tune the
TV to the proper channel for viewing
the picture from the cable box.
1. Repeatedly press MENU•PROG to
select the SETUP MENU, and then
press + or – to display the setup
functions. Repeatedly press
MENU•PROG to select the CABLE
CHAN function.
2. Enter the channel number you want to
program by pressing two digit buttons
on the remote control. (The channel
number you enter is the channel to
which the TV will tune automatically
when you later press the DSS•CABLE
button on the remote.) The TV will
change to the channel you select. This
will help you to confirm that it is
indeed the channel you want the TV
to automatically tune. Most cable
boxes output their signals on either
channel 02, 03, or 04.
3. Press the + button to program the
channel number you selected into
the CABLE CHAN function memory.
Note: Pressing the – button here will
turn off this feature and display
CABLE CHAN: OFF again.
Setting Up Cable Box Channel (with or without remote)
Mute
Video Menu
Audio Menu
Setup Menu
8:27 PM 13
Chan Mem: Stored
Cable/Air: AIr
VCR1 Chan: 91
VCR2 Chan: 92
Cable Chan: Off
8:27 PM 03
Chan Mem: Stored
Cable/Air: AIr
VCR1 Chan: 91
VCR2 Chan: 92
Cable Chan: Off
8:27 PM 03
Chan Mem: Stored
Cable/Air: AIr
VCR1 Chan: 91
VCR2 Chan: 92
Cable Chan: 03
* DSS
®
is a registered trademark of DIRECTV, Inc., a unit of GM Hughes Electronics