Why doesn't the recording indicator light up on my RCA Full Logic Controlled Stereo Cassette Deck?
If the recording indicator isn't lighting up, it could be because the cassette erasure prevention tabs are broken, so replace the cassette with one whose tabs are intact. You can also cover the hole over the tab.
Why can I still hear previous recordings when rerecording on my RCA Full Logic Controlled Stereo Cassette Deck?
If you're hearing sound from previous recordings when rerecording a tape, the head is likely dirty. Clean the head.
What to do if the door on my RCA Full Logic Controlled Stereo Cassette Deck doesn't close?
If the door doesn't close, the cassette might not be properly loaded. Reinsert the cassette.
Why doesn't the music search function work on my RCA Cassette Player?
If the music search function isn't working, it could be because the blanks between selections are less than 4 seconds long. Use a tape with blanks more than 4 seconds long.
General| Brand | RCA |
|---|---|
| Track System | 4-track, 2-channel stereo |
| Motor | DC servo motor |
| Type | audio cassette deck |
| Controls | full logic |
| Frequency Response | 30 Hz - 16 kHz |
| Wow and Flutter | 0.08% WRMS |
| Output | Line |
Essential safety advice covering electrical hazards, power cord handling, condensation, and FCC compliance.
Guidelines for safe usage, including cleaning, handling near water, power protection, and preventing object insertion.
Details servicing requirements, safety checks, proper mounting, and heat considerations for safe operation.
Highlights key cassette functions like AMS, Dolby NR, auto-reverse, dubbing, and automatic operation.
Describes controls for managing recording quality, including level adjustment and peak meters.
Guidance on ideal installation locations, avoiding heat, humidity, dust, and electronic interference for optimal performance.
Instructions on checking tape condition, slack, and using erasure prevention tabs for recording protection.
Explains the automatic tape selector function and requirements for different tape types.
Advice on optimal tape usage, proper storage, and handling of tape winding issues.
Details cleaning critical tape path components and the importance of head demagnetization.
Instructions on how to clean the unit's exterior front panel safely.
Guides on connecting audio input/output and system remote control cables for proper operation.
Details connecting the unit's power cord to a power outlet.
Details the function of Deck I controls including power, playback, recording, and special features.
Describes Deck II controls for playback, recording, level adjustment, and eject functions.
Explains playback modes like one-way, two-way, repeat, and relay playback with blank skip.
Details operating single decks with a remote and explains the Dolby NR system for noise reduction.
Explains indicators for tape transport modes and the level meter for both decks.
Details single playback, temporary stopping, and utilizing the blank skip feature.
Explains relay playback for continuous listening and sequence settings based on REV MODE.
Details auto music search for skipping tracks, selecting songs, and notes on operation and limitations.
Details recording process, erasure prevention, and adjusting recording level for optimal sound.
Explains the recording mute function and the procedure for erasing recorded tape content.
Guides on copying tapes, including speed selection, Dolby NR, and potential interference.
Provides solutions for common issues related to power, cassette door, and playback.
Offers remedies for recording indicator, level meter, sound output, and REC LEVEL control malfunctions.
Addresses issues causing poor sound quality, such as unstable sound, frequency loss, distortion, and noise.
Provides solutions for malfunctions in the music search function and the remote control system.
Details technical specs for heads, motor, frequency response, noise reduction, and audio input/output.
Lists subfunctions, power requirements, dimensions, weight, and included accessories.
Outlines the terms of the limited one-year warranty, including coverage and exclusions.
To Next Page
