References
Trouble Checks
Trouble
Remote
Works part or none of the
time
Checks and Adjustments
Clear the path between the remote and TV of any objects.
Aim the remote at the component you are trying to control.
Make sure batteries in the remote are not dead.
See if batteries are placed in remote correctly. See batteries, page 2.
Can't select certain channel Press number buttons. Channel may not be in memory. See autoprogram
on page 11.
Make sure TV/VGR switch on VCR is in the TV position if using VCR.
For numbers over 100, press and hold 1 until 1-- appears, then press the
other two numbers.
Set Cable/Air feature to Cable for channels higher than 69. See page 16.
TV Turns on or off
Turns off by itself
Check Sleep Timer. See sleep timer on page 13.
Wait 30 seconds and turn on again, a power surge may have occured.
Check Alarm Off time. See alarm clock on page 14.
Turns on by itself
Check Alarm On Time. See alarm clock on page 14.
Check clock time. See clock on page 3.
Does not turn off at
Alarm Time
Make sure alarm is turned on or off. See alarm clock on page 14.
Check clock time. See clock on page 3.
Make sure Clock time is set correctly, including AM and PM.
Check Alarm Off time.
2O
To Next Page
Loading...
