13. When done, click on the button “Submit” located at the end of the page. Now go to
the menu “Audio” and select the configuration of tones followed by the button
“Submit”. In this case we have chosen United States (see figure 4-9).
Figure 4-9. Audio
14. Now the RCA phone is registered with Elastix. Configure the other IP (SIP) Phone
with the correct parameters.
15. To test the RCA IP115, pick up the previously configured IP (SIP) Phone and call
the IP115’s extension number (301 in this example). When the call is established,
speak into the phone and verify that the other IP (SIP) Phone can hear your voice.
Check this by calling from both ends.
To Previous Page
Loading...
Need help?
General
