Toregisterapassword
1 Press SETUP/TV MENU in the TV mode.The TV
menu screen will appear.
2 Press • or • to select"Lock", then press • or
ENTER.
3 Select and enter your password (4 digits) using
Number buttons (0-9), then press ENTER.
4
"_k" appears instead of the number.
Enter the same password again to confirm, then
press ENTER.
The password is now registered.
NOTE:
• If you forget your password, you can reset it. Turn
the volume all the way down using VOLUME - on
the TV. Continue holding the button and press 0
on the remote control at the same time for about 5
seconds. Enter a new password.
• To avoid forgetting the password, write it down and
keep in a safe place.
To set the V-Chip
1 Press SETUP/TV MENU in the TV mode.The TV
menu screen will appear.
2
3
4
5
6
Press • or • to select "Lock" menu, then press
• or ENTER.
Use Number buttons (0-9) to enter your
password, then press ENTER. Then Lock menu
will appear.
Press • or • to select "V-Chip", then press
4 or • to select "On".
Press • or • to select "V-Chip Set", then press
• or ENTER.
The V-Chip Set Menu appears.
Press • or • to select which rating will be used,
then press • or ENTER. Each rating below will
appear.
TV Rating
You can set the rating using age level and genre.
Age:
TV-Y : All children
TV-Y7 : 7 years old and above
TV-G : General audience
TV-PG :Parental guidance
TV-14 : 14 years old and above
TV-MA : 17 years old and above
Genre:
ALL : All
D : Dialogue
L : Language
S : Sex
V :Violence
FV : Fantasy Violence
Movie Rating
7
8
G : All ages
PG : Parental guidance
PG-13 : Parental guidance less than 13 years oId
R : Under 17 years old parental guidance
suggested
N0-17 : 17 years old and above
X : Adult only
Press •/•/,/• to select the desired rating, then
press ENTER.
PressEXIT/CANCEL to returnto the normal screen.
V-Chip function is activated now.
To use the TV after the TV is protected,
When a program is received that is blocked by the
V-Chip, press MUTE, then enter your password.
The protection will be temporarily overridden. If the
TV is turned off or the channel is changed, the V-Chip
restriction will be reactivated.
2
3
NOTE:
• The V-Chip function is activated only on programs
and input sources that include a rating signal.
To change the password
1 Press SETUP/TV MENU in the TV mode.The TV
menu screen will appear.
Press • or • to select "Lock", then press • or
ENTER.
4
5
6
Use Number buttons (0-9) to enter your
password, then press ENTER. The Lock menu
will appear.
Press • or • to select "Change Password", then
press • or ENTER.
The Change Password screen will appear.
Enter a new password using Number buttons
(0-9), then press ENTER.
Enter the same password again to confirm, then
press ENTER.
The password is now registered.
Downloading the additional V-Chip rating system
As a supplement to the standard V-Chip rating
system, your television will be able to download an
additional rating system, if such a system becomes
available in the future.
19
To Next Page
Loading...
Need help?
General
