RCA LED46A55R120Q - Sound Menu; Sound Menu: Audio Output Configuration

OSD Menu Operations
25
Dynamic Contrast, Film Mode, Noise Reduction
Set dynamic contrast as Off/Low/Medium/High. Set film mode on/off. Set noise reduction as Off/Low/Medium/High.
MPEG Noise Reduction
Set MPEG noise reduction as Off/Low/Medium or High.
Note: Noise reduction helps to reduce the picture “static” or any type of interference. This feature is especially useful for
providing a clearer picture in weak analog signal conditions. The MPEG Noise Reduction specifically works on video signal
with MPEG coding.
MFC Demo (Motion Flow Compensation Demo)
Set MFC Demo On/Off. It shows the difference between MFC Effect on and off modes on the screen.
The screen shows as picture given below when sets MFC Demo on:
Left side: Set MFC Effect Off
Right side: Set MFC Effect On (Provides smoother picture movement)
Off On
MFC Effect (Motion Flow Compensation Effect)
:Change Setting
:Move
:Return
MENU
Film Mode
Noise Reduction
MPEG Noise Reduction
Dynamic Contrast Off
Off
Medium
Off
ADVANCED PICTURE SETTINGS
MFC Effect Medium
MFC Demo Off
MFC Effect: Set MFC Effect as Off/Low/Medium/High.
MFC Effect technology removes drag from fast scenes with a
lot of movement to provide a smoother picture. Off switches the
MFC Effect off, High provides smoother effect, Low provides
smooth effect, Medium sets MFC Effect to medium.