Note: The OSD’s appearance and color are referred to the actual appliance.
Others Menu
The Others Menu lets you config the TV with your preferences in other features.
Choose OTHERS from the Main Menu. Press ENTER button to proceed to SETUP menu.
Blue Back
Press ENTER button to select Blue Back on or off. If the Blue Back is turned on, the TV will display a blue background when
there is no signal input.
No Signal Power Off
Press ENTER button to select “No Signal Power Off” on or off. If it is turned on, the TV will shut off after 10-minute
no signal time. We suggest you turn on this function when Blue Back is turned on. Because it may hurt the LED LCD panel
No Operation Power Off
Press ENTER button to select “No Operation Power Off” on or off. If it is turned on, the TV will shut off after a 3-hours
no operation time.
All Reset
Press ENTER button to execute reset to TV system. All the settings will be reset to factory default.
Audio Only
Press ENTER button to activate audio only mode. The TV will output only sound and the LED LCD panel will be turned off.
To restore normal playing, hold POWER button for three seconds.
if the blue screen lasts too long.if the blue screen lasts too long.
Note: In PC mode, the monitor standby and power off settings depend on the No Signal Off time.
Use up/down to choose the function you need, press
ENTER or right arrow to adjust or enter a sub-menu.
The sub-menu image and explanation are shown below.
OSD Menu Operations
34
:On/Off
:Move
:Return
MENU
ENTER
OTHERS
No Signal Power Off
No Operation Power Off
All Reset
Audio Only
Blue Back
Execute
Execute
To Next Page
Loading...
Need help?
General
